Logo

1990 johnson 70hp no spark

kriller

New member
I have a johnson 70 horse and

I have a johnson 70 horse and it ran fine last fall now i pulled it out and wouldnt start. so i disconnected the black/yellow wire at the control box that goes to the ignition and kill switch and it runs fine. does this mean its the kil switch or could it be a sensor? any help would be greatly appreciated thanks
 
"It's either the kill swit

"It's either the kill switch gone bad, or there's a short to ground at some point in the wiring between the switch and the control box."
 
Back
Top