Logo

1987 Johnson 8hp rebuilt carb

Why was the carburetor taken off for work ?-------Any other trouble shooting done ?----So it started before the carburetor work ?-----Choke flapper closing properly ?
 
The little hose in bowl was disintegrated so replaced everything
250.00 bucks everything new except aluminum base it ran without tube half choked
 
Do you have the OMC service manual? Did you do a link & synch? The procedure is described in section 1 of the manual.
 
The little hose in bowl was disintegrated so replaced everything
250.00 bucks everything new except aluminum base it ran without tube half choked


A have you tried a spray of 50:1 fuel mixture into the carb throat ?

This manual covers your engine and may be helpful: http://162.144.28.33/lib/evinrude/manuals/1971-1989johnsonevinrude.html#/0

If you try redoing the "sync and link" be very wary of altering the adjustment screw on the cam follower. The U shaped part get gets brittle with age and is easily broken.

Did you remove the HT coils ?
 
Back
Top