kenlafitte
New member
"Hello,
I lost spark on 1,3,5
"Hello,
I lost spark on 1,3,5 Bank. I noticed that my Idle stabalizer wire Insulation was missing on back of wire and touching the block. I repaired the wire and Installed a new SwitchBox. Still no spark. I disconected the wires and checked both wires of the Idle Stabalizer with the ground wire. I showed continuity between each wire and ground of the SwitchBox ground wire. Is there a correct way to check the Stabalizer. Could this cause a No spark condition since it attaches to SwitchBox that controls spark on 1,3,and 5. I purchased a Seloc Manual but it makes no mention of this test. Help!!
Thanks Ken"
I lost spark on 1,3,5
"Hello,
I lost spark on 1,3,5 Bank. I noticed that my Idle stabalizer wire Insulation was missing on back of wire and touching the block. I repaired the wire and Installed a new SwitchBox. Still no spark. I disconected the wires and checked both wires of the Idle Stabalizer with the ground wire. I showed continuity between each wire and ground of the SwitchBox ground wire. Is there a correct way to check the Stabalizer. Could this cause a No spark condition since it attaches to SwitchBox that controls spark on 1,3,and 5. I purchased a Seloc Manual but it makes no mention of this test. Help!!
Thanks Ken"
