1986 50hp evinrude head gasket torque settings

[Haaka1981]

Hello all, this is an awesome site and truely helpful. I'm after the torque settings (nm please) as pattern for my 1986 50hp evinrude.

any help would be much appropriated.

thanks Haaka

 

[vics]

24.4 to 27.1 Nm

See http://************/lib/evinrude/manuals/1971-1989johnsonevinrude.html#/588 ........ but you'll have to convert from the antiquated inch pounds units given there

Blast this site wont let me post the link

the missing bit is boatinfo . no without the spaces

 

[vics]

24.4 to 27.1 Nm

See http://************/lib/evinrude/manuals/1971-1989johnsonevinrude.html#/588 ........ but you'll have to convert from the antiquated inch pounds units given there

Blast this site wont let me post the link

the missing bit is boatinfo . no without the spaces

That link still did not work

its http://************/lib/evinrude/manuals/1971-1989johnsonevinrude.html#/588

where the missing bit is boatinfo . no without the spaces

The table you need if the link does not you directly to it is Appendix A3 on page 589