I picked up an 86 Thundercraft for the lake with a 115HP inline 6 cyl. The motor is very clean, starts and idles well. But when in the water the motor will only rev to about 2000 rpm and can hear it missing. What i did find when i ran it on the trailer was that i did get a shock form the #6 plug lead. Also a bit of feul is being spit back out the lower carb So what i was thinking to start with was to replace all the leads, it has new plugs already. I was wonding if these motors have had any problems or what things to look out for.
Thanks for any input in advance
Chris
Thanks for any input in advance
Chris

