1984 115hp v4 Evinrude Engine removal

[comet424]

hi i posted before about my engine but now i got a repair book and it told me to remove the 2 bolts in front the 2 nuts at the back and the 6 bolts that hold the engine to the lower have i try lifting it with a hose to split it but it doesnt come off what do i do?

i know i see 3 bolts in the back going down into the lower half but book never said anything about that any advise i dont wanna break it the engine

 

[racerone]

2 nuts at the front---- 2 nuts at the back------------- 2 bolts at the front--------------- total of 6 bolts on rhe sides.------------2 small bolts on the lower cowling.

 

[comet424]

ah ok ya i got it thanks and then the shifter for reverse and forward was last i had to take off

now if i just going tgo replace rings and gthe lower case seal do i need to rip whole engine apart or what should i do?

 

[racerone]

To replace the piston rings , the motor must be taken apart all the way -------No shortcuts at all.

 

[comet424]

ah ok when replacing the rings should i be replacing anything else at the mean time?

 

[comet424]

ok i got another question how do u remove the lower seal from the engine or when do u remove it after u pull the side off with the 4 allon keys?

as i cant pull the bottom off i got all the bolts off