1980 75hp Evinrude

[TNStream]

Anyone have the ohm readings for trigger on a 1980 75hp Evinrude.
Went to CDI electronics and I get two different charts with different readings?
One has testing specs for stator and trigger, which states 35-45 ohms on all three white to Purple/Green/Blue?
Then searching again CDI states with no spark troubleshooting that chart for testing trigger has a range of 9-21 ohms?

I know my trigger tests white/purple 18.4-18.0, to /Green 200k, to /Blue 18.3-18.0
Bad green leg!
Tia

 

[racerone]

Are you not getting spark on 1 cylinder ?----Or no spark on any ?

 

[TNStream]

Previously tested had all 3 sparking good, starts and idles ok with a little shudder.
Just Boggs when going to 1/2-wot!
Just received a trigger with 12.3 on all three legs so hopefully this fixes it. My trigger obviously has an open leg.
Thanks