Logo
FULL SITE MENU

1976 evinrude 200hp

"thats electric shift ,does it

"thats electric shift ,does it sound like or is it clicking like the dogs are rounded off,or nothing at all,shut off the engine and try to turn the prop,it goes in automaticly when there
is no power."
 
"76 200,is not elect shift,..i

"76 200,is not elect shift,..its hydro-mechanical..2 totally diff animals..explain ur prob better pls,..might be a control box prob?,shift cable,...etc."
 
"those actually,are very smoot

"those actually,are very smooth shifting units,...i built up an early 70's 135 for my daughter and son in law,for a wedding present...bass boat,..incl..."
 
"Remove shift cable from engin

"Remove shift cable from engine. Shift manually via the engine's shift linkage. If this results in proper shifting, suspect a non centered shift cable.

If no change..... lower unit problems.

(Centering Shift Cable)
(J. Reeves)

When all is as it should be, the proper method to adjust the shift cable is to disconnect the cable from the engine. Move the shift linkage on the engine to find the center of the play in neutral, and when found, leave it centered.

Now, grab the end of the shift cable sleeve, push and pull it to find the center of the play there, and center that play.

Adjust the trunion on the threaded portion of the shift cable so that the centered play of the cable lines up with the centered play of the engine's shift linkage. Install and lock the shift cable with the retaining clamp in that position. That's it.

Thousands of parts in my remaining stock. Not able to list them all. Let me know what you need and I'll look it up for you. Visit my eBay store at:

http://stores.ebay.com/Evinrude-Johnson-Outboard-Parts-etc?refid=store"
 
Back
Top