Hello Scooter here in Kansas City, glad to be here. If I could please get a little help I recently purchased this folder and did the normal barb rebuild, plugs, condenser, points etc..
Now for my question, when I fired it up yesterday in the driveway it ran well and now idles ok, the problem is that the 8 holes where the water exits the leg, the left side mists water well, however the right side oozes an oily sludge. Then this morning I went out and there was a small 2" oil puddle on the ground which seems to have come from the area just above the right 4 holes where the lip of the leg housing is.
thanks for reading any help would be appreciated.
scooter
Now for my question, when I fired it up yesterday in the driveway it ran well and now idles ok, the problem is that the 8 holes where the water exits the leg, the left side mists water well, however the right side oozes an oily sludge. Then this morning I went out and there was a small 2" oil puddle on the ground which seems to have come from the area just above the right 4 holes where the lip of the leg housing is.
thanks for reading any help would be appreciated.
scooter