1967 6HP Johnson Motor

[RickSardou]

Can someone tell me if there is a check valve inside the
[h=1]Fuel Connector Body Assembly[/h]
Thank you,
Rick

 

[johnnygjr]

There's a check valve inside of primer bulb

 

[Boobie]

Newer ones had them, older ones didn't. They were put in to stop the connector from dripping when the line was disconnected. The ones that had them had a little tit in the center of the fuel line.

 

[fdrgator]

There is a small pin sticking out of the connector after you remove the hose, if it is the new style with a valve. The pin is obvious, if it is there. The 1967 models did not have them, unless it has been changed.