Logo
FULL SITE MENU

1966Johnson 40 H/p controls

B

boatbo

New member
Just bought the above mentioned motor without controls. Tried to locate something on EBay but couldn't find any matches. Motor has rectangular plug with 8 wires, battery connections and seperate red wire for choke. This is an electric shift model (RK-28B).
any help, advise appreciated.
 
Depending on where you live , used ones may be plentiful.--------------You need the electramatic control ( johnson / single lever ) or the Evinrude version with push buttons will also work.-------- You also need the junction box with solenoid and voltage regulator.----------------------The belt driven generator must be checked and MUST work to supply voltage to the electromagnets when motor is running in gear.---If it does not work , then battery will drain quickly.
 
Last edited:
Thanks for the info. I live in Erie PA. Any ideas on where I might find the required equipment? What would be a reasonable price for the controls etc. Thanks
 
Back
Top