150 mariner lower unit please help

[Craig Meunier]

" I replaced the seals on the

" I replaced the seals on the prop shaft and am not sure if I'm going back together correctly. I pulled the hub and replaced seals with no problem, but when I put it all back together, it feels like the gears didnt mesh together right. I have foward engaging but not reverse..Is there a trick to it I have missed? thx for any help "

 

[tonyaus]

Craig
Sounds like the bearin

Craig
Sounds like the bearing carrier hasn t seated properly.

 

[CRAIG MEUNIER]

" THX TONYAUS, I PUT IT IN REV

" THX TONYAUS, I PUT IT IN REVERSE AND THEN PUT IT ALL BACK TOGRTHER AND IT WORKED.. "