Logo

130 Johson doesnt pee well

eacinc

Member
"I have a 1995 130 Johson that

"I have a 1995 130 Johson that doesnt have a strong stream of water comming out, just seems to drible out, the same at idle or wot. I bought this motor last year and I thought that it needed a new pump which I replaced with a complete kit. Still was same way. I talked to guy I bought it from and he said it was like that from new, and an OMC dealer told me as long as there is water comming out that is was ok. I have had alot of outboards over the years and this just doesnt seem right to me. The motor doesnt get hot, but its anyoing to not see the stream as you should when underway. Could it be this is common to just these motors,as it is I guess, sort of an oddball motor?"
 
"Lee.. try taking the little h

"Lee.. try taking the little hose loose at the fitting in the pan...if better, fitiing is the problem..and this is common..."
 
"Thanks Tom, Im sure I tried t

"Thanks Tom, Im sure I tried that but Ill try it again. It just seems to not have much preasure at that small hose. Also at the outlet fitting it has a larger hose maby 1/4 or 3/8ths on this fitting with a check valve at the end. Also has another place for a hose that has a rubber cap on it, so the outlet fitting has three outlets itself. I thought this was of someones doing but an OMC dealer showed me in the book that is the way it was made. Makes no sense to me. Also the outlet fitting itself is about 3/8ths around on the outside. Maybe Im just worried about nothing but people allways yell to me that my motor isnt peeing because you really have to look to see it. Thanks again."
 
Back
Top