Logo

115evinrude 1981 losspower after30mins

ph1

New member
i have a 115evinrude after 30mins or more it fouls out a plug or 2. i cleaned the carb checked compreshin 120 120 120 110 . have swaped coils from side to side on differnt have new plugs in it. after it cools down clean plugs or replace them with new it will run 4 about 30mins 0r more then fail the plugs againe.
 
Last edited:
Do a spark intensity check.-----an ignition sytem on those that is in good shape should easily jump a gap of 7/16" on all 4 .---------Are the thermostats installed and in good shape ??-----Fuel pump diaphragm in good shape ?
 
Do a spark intensity check.-----an ignition sytem on those that is in good shape should easily jump a gap of 7/16" on all 4 .---------Are the thermostats installed and in good shape ??-----Fuel pump diaphragm in good shape ?

how do u do a spark intensity check. i look at the fule pump diaphragm it looked good didnt see any rips or tears in it
 
Back
Top