I have an 05 E115FSLSOD, evinrude 115 hp. that cuts out at around 2800 rpm. I have completely replaced/gone through the entire fuel system. cleaned the tank, cleaned the pickup, new fuel lines, filters, both fuel pumps are new and have the correct pressure, cleaned the vapor separator, injectors professionally rebuilt new indexed plugs, good even compression, the oil system has been checked out per the manual with good return flow and pressure. i have the evtech software and have done all the tests and checks. there aren't any check engine codes and I don't think it is in slow mode but it acts like it. it acts like a fuel filter is clogged. if anyone has any suggestions it sure would help.
Home
Outboard Motor Parts
Chrysler outboard parts Evinrude outboard parts Force outboard parts Honda outboard parts Johnson outboard parts Mariner outboard parts Mercury outboard parts Suzuki outboard parts Tohatsu outboard parts Yamaha outboard partsInboard & Sterndrive Engine Parts
Chrysler Marine inboard parts Crusader Marine parts MerCruiser sterndrive parts OMC sterndrive parts Pleasurecraft Marine parts Volvo Penta marine parts + MoreAll Engine Brands
All Manuals HomeOutboard Repair Manuals
Chrysler outboard manuals Evinrude outboard manuals Force outboard manuals Honda outboard manuals Johnson outboard manuals Mariner outboard manualsMercury outboard manuals Nissan outboard manuals Suzuki outboard manuals Tohatsu outboard manuals Yamaha outboard manuals
Inboard & Sterndrive Engine Manuals
MerCruiser sterndrive manuals OMC sterndrive manuals Volvo Penta marine engine manualsPlease Note
MarineEngine.com does not offer troubleshooting assistance or repair advice by email or by telephone.
You are invited to join our public Boat Repair Forum to seek assistance from other members.
You may also visit the Boat Motor Manuals section of our site to obtain a service manual.