Logo
FULL SITE MENU

Search results

  1. D

    Wiring helpplease

    "73 chrysler 318....appears to "73 chrysler 318....appears to be original alternator....Has a small lite green wire running to a small silver box, that box has a red wire going to ballast resister...Alt also has a larger orange wire going into the wiring harness....no other wires visable....Is...
  2. D

    318 removal and replacement

    "I have to remove the 318 from "I have to remove the 318 from my 73 gibson, married to a dana 90 outdrive..The block cracked.. I found a 318 from a friendout of a 82 dodge diplomat....Whatneeds to be done??? what has to be done to remove engine , outdrive etc??? I am an ametuer at this...Jeff...
  3. D

    New ballast resistor

    "Put a new coil and wires, plu "Put a new coil and wires, plugs on my 1973 318 a few weeks ago, but didnt change the ballast resistor, so today I replaced it....It started to smoke, very lightly a few minutes after the engine was started and running.....I triple check the wiring, it is wired...
  4. D

    Best range for economy rpm

    "I realize that it will very f "I realize that it will very from boat to boat, but what is your best RPM range for economy. I have a 30 foot gibson, single screw with a 318...Travel lift scales indicate that it weighs near 8,000lbs........Also what is the max RPM a 318 should turn for a long...
  5. D

    Newbie questions about 1973 318

    "After a few weekends of work, "After a few weekends of work, we finally got our 318 running.....We changed everything that we could...finally wired it correctly and she fired up and ran fine....Can someone tell me where the sending units for the temp and oil pressure are located on the...
  6. D

    1973 318 trouble

    "Hello All... Just purcha "Hello All... Just purchased a 73 Gibson with a 318, will not start....Electrical problems....Any idea where and how to start.....I am far from a good mechanic, but willing to learn......Any one have a wiring diagram of engine???? Thanks, Daron"
Back
Top