Logo

Search results

  1. G

    Help please water in oil AQ260 5.7

    I would really appreciate some help and advice. Just run the engine up after a few months out of the water all temperatures fine, noticed a bit of a misfire and also water droplets coming out of the carb intake Noticed white gunge on the oil filler cap Further investigations I have found that...
  2. G

    1986 AQ260A 57 Difficult to Start

    If I leave my engine for a cou If I leave my engine for a couple of weeks I usually have to put a bit of petrol down the carb to get it to start. Once started it is fine and then starts immediately every time. I have checked the Electric choke and also it will squirt fuel at the Carb if I...
  3. G

    Running engine on hose pipe

    Can you advise me if it is OK Can you advise me if it is OK to run my AQ250 by the following method... The sea water pump is removed. If I run my hose pipe straight into the outgoing pipe from the sea water pump will it be Ok to run the engine like this for testing Thanks for any advice...
  4. G

    Choke

    Is there a manual choke conver Is there a manual choke conversion for the AQ 260a 5.7 VG Year1986
  5. G

    Rope Cutter

    Does anyone know if there is a Does anyone know if there is a rope cutter that can be installed on a 280 drive
  6. G

    AQ270 Outdrive

    Can you advise me how if it is Can you advise me how if it is possible to get a good water tight seal on the cover to the shift mechanism please?
  7. G

    270 outdrive

    "Just in the process of removi "Just in the process of removing the outdrive leg and noticed a considerable build up of mud in the upper leg compartemnt where the fwd/rev linkage is attached. This explains why it was difficult to get into reverse as the mud hardens and gets in the way of the...
  8. G

    Universal joint bellows 270

    Is there some sort of rubber s Is there some sort of rubber sealant that is recommended to be applied when fitting the universal joint bellows. Or should they be fitted as they come with just a new clamp?
Back
Top