Logo

Search results

  1. joed9988

    1989 force 150 trim

    when you try to use the trim up/down buton do you hear a click? that is the relays trying to work
  2. joed9988

    1989 force 150 trim

    Some of the motors have a manual release not sure about the 150
  3. joed9988

    1988-1989 85 Hp Force Motor doesn't get spark on 1 cylinder.

    ok seeming to have issues with the timing might be doing it wrong tho i marked the line on the right in the group of 3 with a marker and set the gun for to 28 and ive adjust this thing to the max both ways and cant get the line to line up its still off by 1/2 inch.
  4. joed9988

    when should i replace my steering cable?

    yeah i disconnected the arm and the motor moved pretty freely i watch a video from a dude on youtube dangar marine and it explained the trouble shooting on it. i couldnt get the rod part out i didnt have the clearance i think i would have to move the motor to the left on the transom or...
  5. joed9988

    1988-1989 85 Hp Force Motor doesn't get spark on 1 cylinder.

    yah i got to buy a light gun to adjust the timing also i adjusted the linkage on the throtle so that when its all the way forward the air intakes are fully open but now it seems to idle a lil fast
  6. joed9988

    1988-1989 85 Hp Force Motor doesn't get spark on 1 cylinder.

    success! all 3 cylinders are firing now
  7. joed9988

    WaterCooling

    thank you
  8. joed9988

    1988-1989 85 Hp Force Motor doesn't get spark on 1 cylinder.

    yah already past that 5 years ago when i replaced the stator i have no clue where anything is supposed to be
  9. joed9988

    when should i replace my steering cable?

    so i have a 1988 bass boat i got a few years back this is really my frist boat and ive always found that turning it was kinda tough but i also have nothing to base it on. it turns tho but is there a test or rule of thumb on steering the boat? i really have nothing to compare it to mabey its...
  10. joed9988

    1988-1989 85 Hp Force Motor doesn't get spark on 1 cylinder.

    next thing i think im gonna have to figure out is how to set the timing on this thing yikes!
  11. joed9988

    ok this one is blowing my mind

    well if anyone cares now that understand a little more about how these are wired it was hard to trouble with out a good spark tester. but the book wiring was right but the numbers were wrong the way it was set to wire would have worked but it showed it as going to cylinder 4 and it was...
  12. joed9988

    WaterCooling

    while i await my new trigger in hopes that fixes my problem. another problem i had was the water cooling. i stuck the lower unit in a bucket of water and thought that i would get a decent flow of water out the back port holes and it kinda just sputtered out i bought and replaced the impeller...
  13. joed9988

    1988-1989 85 Hp Force Motor doesn't get spark on 1 cylinder.

    so i just ordered a new trigger i was getting the right resistances when i tested it but as of 3 days ago one pair of wires was only getting 20 ohms and it should be at 50ish and it seems whatever module on the power pack i hook it up too it doesn't fire the key to was to use a different...
  14. joed9988

    ok this one is blowing my mind

    anyone look at what im talking about i know its alot to wrap your head around but i feel like i cant be crazy that the book is wrong
  15. joed9988

    ok this one is blowing my mind

    so i had bought a new black coil from cdi at some point and never hooked it up so i tried hooking it up with the black power pack and still get nothing my head hurts and im about to wrap this back up and try again in another 5 years
Back
Top