Logo
FULL SITE MENU

Recent content by TreemanMI

  1. T

    97 Bf15a exhaust leak

    Well I finally pulled this old girl out of project purgatory… Got the power head off. Pulled the exhaust pipe and other exhaust components apart. It doesn’t appear to be obvious where this leak is coming from. Can’t see signs on the existing gaskets of leaks on the perimeter. However the seal...
  2. T

    ‘73 Evinrude Ignition Diagnosis Question

    Working on a no spark on all cylinders condition on this 3 cyl 65hp. I followed the directions from CDI for troubleshooting but I’m not 100% clear on what’s wrong. Here’s the data: Kill circuit isn’t the issue. brown to brown/orange (stator) is giving me 260V DVA connected, 340V disconnected...
  3. T

    ‘72 Johnson 20hp Magneto ?s

    Tearing into this non running 20hp I picked up. It had been sitting outside the last several years but “ran before it was parked” :) cleaned/rebuilt carb. Replaced impeller and lower oil. Tried to start but no spark. Decided I’d tear into the ignition. Issue #1 - I noticed a decent amount of...
  4. T

    97 Bf15a exhaust leak

    So I’ve had this outboard for several years. Every year I swear it has some new issue. After many carb cleanings and rebuild and gremlins in the ignition system I finally got this motor running great last year. This year it had me stumped. Would start up great on muffs and idle as long as you...
  5. T

    4.3l 1988 2bbl - steering cable removal

    here’s what I’ve got. Thanks for the help…never done this before. My first stern drive boat
  6. T

    4.3l 1988 2bbl - steering cable removal

    Steering started getting hard last year so I knew I had to check the cable out. Disconnected cable from drive and it’s still very hard to turn the wheel. I can move the out drive easily by hand when disconnected. I tried greasing at the zerk on the cable nut and also cleaning the cable end and...
See more
Back
Top