Logo
FULL SITE MENU

Recent content by PNWBoater

  1. P

    1996 VP 5.7L GM TBI Timing chart help..

    Hi, I do not have my manuals with me and I am running into some timing issues.. 1996 Volvo Penta 5.7 L GM TBI ECM1 Delco EST Distributor I have the tool to plug into DCL to put timing in base mode. Start engine> 1000 RPM> switch to base timing mode and Base timing is set at 8BTC > then back...
  2. P

    Chevy 350 fuel cooler question....Mystery barb...

    Chevy 350 with fuel cooler. This motor is new to me and not the original motor. Above the steering cooler is a fuel cooler. I can't see any markings on it. The raw water hoses are connected but there is a brass barb in the front of it, nothing is connected to it and there is a light raw water...
  3. P

    Mercruiser GM 5.7l TBI, shift switch help....

    Hi, new to me is this 350 TBI (not the original engine for the boat), I am not sure what year, can't read the data plate. The motor has this AC Delco electronic ignition and I don't know how to wire the Interruptor shift switch. The coil has 2 (2 wires plugs) no + and - studs. Here are some...
  4. P

    Yamaha 130HP 2 strokes shaking 800 to 1000 rpm

    Hi! I have this 1990 130HP Yamaha 2 strokes 130ETXD. Symptoms: Idle set at 750rpm, gives me 600/650 when in gear (smooth idle). I advance the throttle slowly and between 800 to 1000/1100 rpm the motor shakes enough to shake the whole boat. Passed 1200rpm, runs great. Cold or hot no difference...
  5. P

    1986 115HP mixture setting help ?

    Hi, Just got this 1986 Yamaha 115hp 2 strokes 115ETLJ. I am going through it right now and I have a question about mixture setting. I do not have a 1986 Yamaha manual but my 1990 and 1993 manuals have 5/8 of a turn for mixture setting. However when I cleaned the carbs the mixture was set at 1...
  6. P

    Part number for 1995 150HP steering Link Arm...

    Hi, Anyone would know the part number for a 1995 Yamaha 150TXRT Steering Link Arm? I can't find anything in the catalog. Thank you F1
  7. P

    1986 Yamaha 115 HP stator readings help....

    New to me 1986 115HP yamaha 115ETLJ Work done so far: - Carburator rebuild - New fuel pump -cleaned all fuel lines and filter -New Tstats -New Pressure valve -New spark plugs Issues: Hard to start when cold. Eventually starts and idles fine. In neutral, while advancing throttle, starts to...
  8. P

    1990 130ETXD gasoline octane question.

    I have this old but great 130HP Yamaha 2 strokes. We are on vacation and the local marina only offers Regular gas with 10% Ethanol or Ethanol free high octane gasoline. At home, I have only used Ethanol free 87 octane with this motor. Any restriction on using High octane ? Thank you
See more
Back
Top