Hello -
Let me start out and apologize for the silly question!
I removed the lower unit on my 99 Nissan 140 prior to storing for the winter to replace the seals when I had time. Fast forward to now, I replaced the seals and put the lower unit back on. I put the motor down in a large garbage...
I had replaced the lower unit on my 1998 120 A2 because it totally crapped out with a used one. The seller told me they pressure checked the used one and everything checked out. However, after running it several times, it is leaking lube out of the weep hole. Which seal is leaking to cause that...
Any ideas where a person could acquire a used top end for a 1995 Yamaha 60 HP Pro. I bought a boat at the auction and someone had shot a rifle into the motor and pierced the block.
I assume there are some outboard engine salvage businesses but rather than use the google crap shoot I thought I...
Hello,
I am in the process of removing the lower unit and the access to the pin in the connector is very limited with the shifter in the neutral position. Should the shifter be put in reverse or forward to allow better access? Also, in removal of the pin, is that just tapping with a punch...