Logo
FULL SITE MENU

Recent content by OskarH

  1. O

    Rolling torque Volvo Penta DP-SM

    the span for the rolling torque on this Penta is between 2 and 2,9nm and as you say with old bearings you should aim for the lower part of the span. There are shims that you can change to get another contact pattern but the nut will also change the contact pattern when you tighten it. So it...
  2. O

    Rolling torque Volvo Penta DP-SM

    This is contact pattern when torqued more than 90 degrees from the original marking. This is the contact pattern when torqued like before I started the disassembling.
  3. O

    Rolling torque Volvo Penta DP-SM

    Yes I know the fish scale is not that accurate, but for now that’s what I have. But i have an update. When I was spinning the input shaft of the lower unit I could feel some resistant, almost like you could feel the teeth of the gears. I went to the mechanic and he checked the rolling torque...
  4. O

    Rolling torque Volvo Penta DP-SM

    Hello everybody. I have a problem with my Volvo Penta DP-SM outdrive and would be really happy with some help from you guys as I have ordered a crane for launching the boat on Tuesday. I had som water in the oil and did a pressure test. This showed that I had a leak in the outer prop shaft...
See more
Back
Top