Logo
FULL SITE MENU

Recent content by MXDAD777

  1. M

    2007 F250TXR water in oil

  2. M

    2007 F250TXR water in oil

    Definitely found corrosion present pretty much everywhere. There doesn’t appear to be any pitting on the cam lobes and the cylinder walls look good. My plan is to take the heads and block to a machine shop and have them clean everything up and check it out.
  3. M

    2007 F250TXR water in oil

    I forgot to mention that OEM compression psi is 107.
  4. M

    2007 F250TXR water in oil

    I recently bought a 2007 Parker 2320 with a bad motor. I bought the hull and got the motor for free. I’ve rebuilt many motors in my lifetime, cars engines, motorcycle, small engines, but never an outboard motor. I have all of the necessary tools with the exception of maybe a few speciality tools...
  5. M

    Mercury 150 Big Tiller Hydraulic Assist

    Thanks. I already have the tiller arm with hydraulic connections, so the kit you linked is exactly what I’m looking for only without the arm. Are there individual part numbers for the parts?
  6. M

    Mercury 150 Big Tiller Hydraulic Assist

    I have a Mercury Optimax 150 big tiller on my sled. It has the hydraulic connectors on the tiller arm, but nothing else. On long days my arm is getting tired so I’d like to hook up the hydraulic steering. Is there a kit for this? Either after market or OEM is fine as long as it’s reliable...
  7. M

    Big Tiller Trim not working

    Well I did a little troubleshooting today and took the cover off the tiller handle. For what ever reason, someone had previously disconnected the switch. I plugged it in and it works like a champ.
  8. M

    Big Tiller Trim not working

    I just installed a used big tiller arm on my 2008 Optimax 150. The trim button on the side of the motor works fine, but the trim button on the end of the tiller arm does nothing. Any ideas of what might be causing this or what I could look for? I haven’t had the motor in the water yet, I just...
  9. M

    Yamaha T8 burning oil

    I have a 2006 T8 kicker motor on my boat (no hour meter but estimated about 10 to 12 hours run time). I bought the boat used about 6 months ago. The boat is very clean and was well taken care of. When I bought the boat I checked all of the fluids for level and condition. Both my big motor...
  10. M

    starting issues ????

    I have a 2005 115 hp Mercury outboard jet. This motor has run like a top from day one with out ANY problems at all. Two weeks ago I launched and it fired right up as usual, no problem. I motored down the river shut it down and fished a little. Did this 3 or 4 times with the motor shut down...
See more
Back
Top