Here is a photo of the relay on the left. There are two. They are side by side in the bilge area on my 20ft Pro-V Lund. My boat is a 2000 model. The relay number is located on the top. The number is the bottom sequence. May this help someone in the future. Thanks for all the help. John
This is the pump mounted. If you would like to see the inside of the motor I will disassemble it and take a photo. I remounted it yesterday. What I described above on the electrical component, it is mounted on the brush plate to the blue wire. Blue wire is up and the green wire is down.
The pump will not raise my kicker motor. If I play with the switch it will eventually work for a short period. It will always work going down. I used a test light to the blue wire at the pump motor. I have power there each time the swicth is activated to the raise position. I disassembled...