Logo
FULL SITE MENU

Recent content by Lakegeorge

  1. L

    1998 Evinrude 90hp no spark

    Here are a few photos of the ignition coils. Is there any chance both would stop working at the same time? I cleaned connections and still no start.
  2. L

    1998 Evinrude 90hp no spark

    I jumped the solenoid and still no spark. I removed the yellow and black wire from the ignition key switch.There isn’t a disconnection for the black/yellow wire near the power packs. Still no spark. What next?
  3. L

    1998 Evinrude 90hp no spark

    Any ideas or theories?
  4. L

    1998 Evinrude 90hp no spark

    thanks for the questions. The Model# E90SLECM There is premixed fuel in the tank, coming to the motor. The battery was fully charged and the motor is turning at a high rpm at startup. The water pump was changed within 5 years, and shooting water (hard) from the tell-tale. Because this was a...
  5. L

    1998 Evinrude 90hp no spark

    Hi all, Yesterday I took my boat and 1998 Evinrude 90hp out on the water for the first time (for me). At first it started percent and ran really well. Then the Low Oil alarm came on. So I disconnected the tachometer to stop the buzzing and went fishing. NOTE: I disconnected the Tach. because...
  6. L

    Not running on all cylinders.

    when I activate the shift switch I defiantly hear only 3 cylinders running. When released, I hear all 6 cylinders running. When I switch into forward and reverse I don’t hear a difference in power. This test was done with muffs. Thoughts?
  7. L

    Not running on all cylinders.

    It appears that the shift switch isn’t sticking. It goes in and out freely. Although it also appears that the button that engages the switch isn’t touching the seat when switched into forward/reverse. Maybe the button isn’t fully extended out? Or maybe the seat isn’t high enough?
  8. L

    Not running on all cylinders.

    I have a 2004 Johnson 150hp carbonated outboard. It starts up great, but seems as though it is not running on all cylinders (at startup) thought each plug is firing (I tested with a test light and replaced plugs). It runs on half power for about 10-15 minutes, which at that point I hear the...
See more
Back
Top