Logo
FULL SITE MENU
K

Kirt

New member
Joined
Last seen
Messages
12
Reaction score
0

Latest activity Postings About

    • K
      Kirt replied to the thread Water in bilge.
      It is the cuddy cabin version. My front hatch has a drain hole that goes out the side. I have sealed up anything (If it does leak...
    • K
      Kirt replied to the thread Water in bilge.
      You are correct the swim platform is part of the molding and you can see what I mean by the rear vent, how if it gets up on the swim...
    • K
      Kirt replied to the thread Water in bilge.
      You are correct. I guess when I use the word new, I meant that it has been replaced within the past couple years.. but you are right...
    • K
      Kirt replied to the thread Water in bilge.
      Ok, everything is newer, within 2 years.... How old is something have to be where it is not new if it's a week old is that new 2 weeks...
    • K
      Kirt replied to the thread Water in bilge.
      One last comment. I do have two vents on each side of the boat, and yes I realize one is incoming one is exiting. The (side) vents are...
    • K
      Kirt replied to the thread Water in bilge.
      I agree, putting a vent 2 inches above a swim platform is ridiculous. Don't get me wrong water can come in through the vent and if the...
    • K
      Kirt replied to the thread Water in bilge.
      I did the gaskets and u-joints. All other work I had done. Also, I checked the Stern drive gear fluid, it is like new, it is not...
    • K
      Kirt replied to the thread Water in bilge.
      Yes, I've always had issues with water in the bilge. If the boat sits (in the water) or if I'm on plane... I don't get any water in...
    • K
      Kirt replied to the thread Water in bilge.
      When I say everything is new, I am referring to within the past two years... with the exception of the motor, u-joints and Stern drive...
    • K
      Kirt replied to the thread Water in bilge.
    • K
      Kirt posted the thread Water in bilge in Mercruiser Sterndrive Forum.
      I have a 94, 22' celebrity status. I'm getting excessive water in my bilge during half throttle and rolling waves. I know it's not...
    • K
      Kirt replied to the thread Ignition sensor failure.
      I've had the same problem on my 350 Magnum twice. I have a vent in the back of my boat directly behind and slightly above the motor...
    Show older items
  • Loading…
  • Loading…
Top