Logo
FULL SITE MENU
J

Johnny b good

New member
Joined
Last seen
Messages
17
Reaction score
0

Latest activity Postings About

    • J
      Johnny b good posted the thread Camshaft sensor metal dust contamination in Crusader Marine Engine Forum.
      I just got my engine rebuild and one of them has a sensor problem. I get an engine light for the camshaft position sensor. I replaced...
    • J
      Johnny b good replied to the thread Mefi 4.
      Now it’s the crankshaft that giving me the trouble, I suspect that it needs shims when installing, it rubs in the internal disk.
    • J
      Johnny b good replied to the thread Mefi 4.
      After hours and hours of labour and parts I finally repaired my engine problem. Never, never, never by aftermarket electronics parts...
    • J
      Johnny b good replied to the thread Mefi 4.
      Yes VHS distributor and yes It’s quite easy to adjust can retard with my gateway I have 2 new VHS distributor on it’s way, hope this...
    • J
      Johnny b good replied to the thread Mefi 4.
      Both are LH Why can’t I adjust the can retard with my gateway? I don’t have a scan tool like DIACOM
    • J
      Johnny b good replied to the thread Mefi 4.
      Yes I did but nothing change. I replace it where it was. My gateway (Fox) says 0 for the cam retard no matter how it’s turn. The...
    • J
      Johnny b good replied to the thread Mefi 4.
      Engine run’s with a engine light and buzzer. Get a code 81 for camshaft position sensor, replace twice with no change. Engine run’s...
    • J
      Johnny b good replied to the thread Mefi 4.
      Can’t send file to big
    • J
      Johnny b good replied to the thread Mefi 4.
      Sorry DTC81 If you are referring at conductivity on all wires from crankshaft sensor and distributor sensor yes I did. All my wires are...
    • J
      Johnny b good replied to the thread Mefi 4.
      I don’t see any detail for this DRC81 troubleshooting, can you help?
    • J
      Johnny b good replied to the thread Mefi 4.
      I replace both sensor (ckp and cps) with new purchase on Ebay. Still get engine light and message on my gateway says camshaft sensor fault.
    • J
      Johnny b good replied to the thread Mefi 4.
      You are good, thank you never thought the label was important I was blind with the drawing. B with B A with A
    • J
      Johnny b good replied to the thread Mefi 4.
      I also checked the Mercruiser shematic and same thing, the middle cable from the ckp is going to the middle cps
    • J
      Johnny b good replied to the thread Mefi 4.
      Page 5-19 shematic and L510005P
    • J
      Johnny b good replied to the thread Mefi 4.
      Yes I know all that. I also checked if all my wires are good, no resistance. Here's the schematic I found
    Show older items
  • Loading…
  • Loading…
Back
Top