I’m in Erie Pa
Also need the rod and nylon connectors that go from the stator plate to the carb . I have not been able to find them on any parts diagrams.
Thanks Again
Got new bolts and used a bigger hammer
Popped right off THANKS!!
The flywheel hit the stator coil and spun the plate 90 degrees. Every thing was tight so how can that happen? Need to figure that out before throwing parts in it!!
I have a 28spl that stopped when hitting bottom at idle and would not start.
On inspecting plate under the flywheel has caught and rotated 90 degrees clockwise and tore up the throttle linkage. I suspect the key on the flywheel sheared. I have sheared 2 grade 8 1/4 20 bolts trying to pull the...