Logo
FULL SITE MENU

Recent content by Janker

  1. J

    Mercury 60HP 2 Stroke Stator Question

    All repaired and back up / flying - it was a faulty trigger!
  2. J

    Mercury 60HP 2 Stroke 75HP Stator swap

    All repaired and back up / flying - it was a faulty trigger!
  3. J

    Trigger readings - Merc 60HP 2 Stroke?

    All repaired and back up / flying - it was a faulty trigger!
  4. J

    Trigger readings - Merc 60HP 2 Stroke?

    Hi, just tested the trigger on my miss-firing / down on power 60HP Mercury two stroke. These are the readings: Brown and White/ Black = 0.816k OHMS (816 OHMS) White and White/Black = 0.536k OHMS (536 OHMS) Violet and White/Black = 1.206k OHMS (1,206 OHMS) The figures in the repair manual for...
  5. J

    Mercury 60HP 2 Stroke 75HP Stator swap

    Also I was considering Disconnecting the Regulator/Rectifier and retesting - to do this, which colour wires from it should I unplug please?
  6. J

    Mercury 60HP 2 Stroke 75HP Stator swap

    Thanks, I will pop the flywheel, check the trigger part number and report back.
  7. J

    Mercury 60HP 2 Stroke 75HP Stator swap

    This is the Stator my motor should have: https://www.marineengine.com/newparts/part_details.php?pnum=MER398-832074A+4 But someone has fitted a Red Stator off a 75HP Merc - and its running rough / really low on power. I have set the timing (now 3 deg / 22 deg), fitted new coils, ultrasonic carb...
  8. J

    Mercury 60HP 2 Stroke 75HP Stator swap

    Can you take a stator off a Merc 75HP 2 stroke (which has a different type of switchbox design) and fit it straight onto a 60HP with its original switchbox? I guess the question is, should stators and their corresponding design switch boxes be used together, rather than mixing types?
See more
Back
Top