Logo
FULL SITE MENU

Recent content by j4jaker

  1. J

    50hp 87 evinrude misfire

    I have not tested spark jump with a tool however I can hold about an inch from the block and it reaches the block. The compression values on top cylinder is 130 and the bottom cylinder is 140
  2. J

    50hp 87 evinrude misfire

    Ok sorry first boat still learning all the terminology. So yes I have a VRO pump and it is working properly as I am getting fuel to both carbs no problem. But the top cylinder have verified spark and compression and still getting a miss
  3. J

    50hp 87 evinrude misfire

    Not sure how do I tell?
  4. J

    50hp 87 evinrude misfire

    Ok I'm stumped I have this same motor and it starts no problem when cold. However the top cylinder continues to misfire after swapping coils. Did a leak down and compression test and all was good. Have fiddled with the adjusting screw on the carbs and no change. Any help would be appreciated
  5. J

    1987 Evinrude 50 hp E50TELCUD has me stumped

    Ok I'm stumped I have this same motor and it starts no problem when cold. However the top cylinder continues to misfire after swapping coils. Did a leak down and compression test and all was good. Have fiddled with the adjusting screw on the carbs and no change. Any help would be appreciated
See more
Back
Top