Logo
FULL SITE MENU

Recent content by Crazy4boats

  1. C

    Do I need a special tool to replace the 2 crankshaft seals?

    Never again……
  2. C

    Do I need a special tool to replace the 2 crankshaft seals?

    Good stuff Thanks for everything! I keep u updated.
  3. C

    Do I need a special tool to replace the 2 crankshaft seals?

    Will do Thank u
  4. C

    Do I need a special tool to replace the 2 crankshaft seals?

    I’m sorry, i didn’t text it right. I meant the lower #12 and not the upper #11. I was gonna change the oil pump seals also. Thanks again for all your help and advise! Should I get all new gaskets also?
  5. C

    Do I need a special tool to replace the 2 crankshaft seals?

    Do u think the lower seal would be sufficient? #12? I’m a rookie, I now see the oil pump seals and the crankshaft seals . Thanks
  6. C

    Do I need a special tool to replace the 2 crankshaft seals?

  7. C

    Do I need a special tool to replace the 2 crankshaft seals?

    What do u think?
  8. C

    Do I need a special tool to replace the 2 crankshaft seals?

    In the oil pump diagram, I see crank shaft seals but no oil pump seals ??
  9. C

    Do I need a special tool to replace the 2 crankshaft seals?

    Tu again! I read another thread about this and a gentleman tore the engine apart and changed the seals, put it back together and it still leaked. Took it apart again and this time removed the flywheel to see it was leaking from the block through these oil sealed bolts (6 of them He was nice...
  10. C

    Do I need a special tool to replace the 2 crankshaft seals?

    Thanks for the reply jgmo! I’m just very bold….. I’m in the process of getting the flywheel off and have a feeling with the amount of oil above the flywheel, that the oils coming from the bolts in the block above the flywheel. Seals look good. Can’t see how all that oil would get pass the...
  11. C

    Do I need a special tool to replace the 2 crankshaft seals?

    And are they the ones in the oil pump? Tu
  12. C

    Do I need a special tool to replace the 2 crankshaft seals?

    Had oil coming out of the starter and front clear tube. Took the day and removed the power head. Had oil under the power head. 2002 130 hp. Thanks in advance.
See more
Back
Top