Logo
FULL SITE MENU

Recent content by Chck3300

  1. C

    1971 9.8 merc 110 idle speed

    Motor is running good just need the specs for tuning
  2. C

    1971 9.8 merc 110 idle speed

    I've got a 9.8 that I've been working on. Replaced the baffle gaskets,both of the ones under the powerhead/adapter plate, replaced the waterjacket gasket around the sparkplugs, replaced the white insulator blocks, high speed coil, set the points, swapped the lower unit and had to swap the shift...
  3. C

    Is this a problem?

    Thanks
  4. C

    Is this a problem?

    I guess I jumped the gun alitte on this post. I went to ebay and looked at some used powerheads and you can see the impression in the gasket on them.
  5. C

    Is this a problem?

    1971 mercury 9.8 Hey guys i tore this motor to replace the exhaust gasket and I didn't use any sealant and it still was leaking. Now I have it apart again and noticed this washer was raised just a tad but enough to make an impression on the gasket. It will not go down any farther because of the...
  6. C

    Wot rpm 9.8

    Another question I have a 12v timing light for a car can I use this same one for these small outboards?
  7. C

    Wot rpm 9.8

    1971 9.8 trying to get her tuned up. Was wondering what is the max rpm for this engine also need the same info for a1963 6hp. Thanks
  8. C

    What is this?

    I kinda thought that if that is the case it sucks because it had a lot of fishing line wrapped around it. Are these an aftermarket item? Thanks
  9. C

    What is this?

    File to large for the pic but it looks like a little blender blade right under the prop
  10. C

    What is this?

    I have never seen this before it's right behind the prop. 1971 merc 110 9.8
  11. C

    Transom bolts

    Does anybody know the thread size for the bolts for the t-handles that hold the motor to the transom? 1971 9.8 thanks
  12. C

    1971 merc 110

    Thank you
  13. C

    1971 merc 110

    Does anybody know the torque specs for the exhaust manifold cover. Thanks
  14. C

    1963 merc 60 twin 6hp

    Do we have an expert on these motors? I have several questions. Right now my problem is no spark on the top cylinder.
  15. C

    1963 merc 60 check valves

    Thanks for the reply. The kit I bought for it came with 2 of them but once I removed the piece with the check valves I was able to blow only one way so your right they are still good. Thanks again
See more
Back
Top