Logo
FULL SITE MENU

Recent content by Brodyman1234

  1. B

    1977 55hp Johnson no spark

    Ok thanks
  2. B

    1977 55hp Johnson no spark

    The brown stator wire. Cdi says it should be 150+ volts when disconnected. Which it is. But it’s also supposed to be 150+ volts when it’s connected to the power pack. Which it is not. Cdi says if that’s the case replace the power pack. Which I did but the new power pack does the same thing.
  3. B

    1977 55hp Johnson no spark

    I disconnected the black and yellow wire. Still no spark. This is my first season with the motor.
  4. B

    1977 55hp Johnson no spark

    I did what CDI said to do. I used a fluke meter with a DVA adapter and checked DC voltage on the brown wire from the stator while it was connected to the power pack and while it was disconnected.
  5. B

    1977 55hp Johnson no spark

    Hello, I have a 1977 55hp Johnson that has no spark. I tested the brown wire from the stator and as CDI manual says it has 230volt disconnected. When I connect the brown wire to the power pack it says I should have the same voltage but I only get 1 volt. The mainsail say if that’s the case...
  6. B

    76 Evinrude 55hp 55673 no spark troubleshooting guide

  7. B

    76 Evinrude 55hp 55673 no spark troubleshooting guide

    When it read .726 was it connected to the power pack?
See more
Back
Top