Logo
FULL SITE MENU

Recent content by Brian3127

  1. B

    Bizarre sudden appearance of oil/soot in cooling water after oil change

    a hand pump is probably the safest.
  2. B

    Bizarre sudden appearance of oil/soot in cooling water after oil change

    take the sending unit off the tank then pump it out. After you do that clean the carb too. i dont know about water in the fuel giving you sooty exhaust.
  3. B

    Bizarre sudden appearance of oil/soot in cooling water after oil change

    fuel stabilizer does not get rid of the water. if there is water in the fuel tank you have to drain it
  4. B

    Mercruiser Aloha One

    engine needs to be running.
  5. B

    ignition modual

    mercruiser 3.0 serial number 4920382 the point system was removed from the engine way before i owned it. The writing on the ignition modual is Transpo-cn DM1965hd-10620 Is this the correct one for my boat. the reason i ask is the engine was rebuilt and now im trying to set the timing and it...
  6. B

    gimbal bearing

  7. B

    gimbal bearing

    back story engine started knocking. tore engine apart. broken piston. engine is getting rebuilt. i took the out drive off to get the engine off. do i have to remove the housing from the boat to replace the gimble bearing.
  8. B

    1985 130 hour mercruiser

    I have oil on the side of my engine under the intake exhaust manifold side Does oil run through the manifold. does it need a new gasket. I tried to post a picture but this site won’t let me
  9. B

    Mercruiser 3.0 base timing issue

    I have a 1989 smokercraft with a mercruiser 3.0 engine. I had to buy a plug that goes into the ignition module so I can put the engine on base mode. When I start the engine and then plug it in and connect to 12v the engine rpm does not drop at all so what does this mean. I thought I read...
See more
Back
Top