Logo
FULL SITE MENU

Recent content by BinLinerCashity

  1. B

    Gen 1 Alpha 2 Leaking Oil

    okay so one more newby question for you gentlemen before i get my hands dirty. if my bellows are dry is there a chance it could be the oil seals on the downward shaft leaking and weeping from the hole? i believe they are seals #5 on the diagram.and if it were those two seals would i be able to...
  2. B

    Gen 1 Alpha 2 Leaking Oil

    is it necessary to buy the mercruiser torque wrench? i have swivels and spent 1000 bucks on a snap on torque wrench lol.
  3. B

    Gen 1 Alpha 2 Leaking Oil

    pressure tested top unit and it holds only about 8 psi then begins to have a trickle of gear oil out of that weep hole above the shift linkage. oil in both units looks clean no milkshake thankfully. anyway you could link those special tools needed to disassemble the upper unit? will i be able to...
  4. B

    Gen 1 Alpha 2 Leaking Oil

    can i replace the seal by just pulling the whole drive off at the gimbal or do i have to split the drive
  5. B

    Gen 1 Alpha 2 Leaking Oil

    any chance you could drop a part# or a diagram? i’m a little lost here, i’ve worked on plenty of boat engine but never any drives.
  6. B

    Gen 1 Alpha 2 Leaking Oil

    1997 3.0 with then G1A2 is leaking oil from the weep hole above the shift shaft. had it on the water yesterday and came home from work to the leak. i’m a technician at a dealership so i figure i can fix it myself but would like some guidance. what’s needed for this repair and what might be...
  7. B

    Gen 1 Alpha 2 Leaking Oil

    here’s a photo of the leak
  8. B

    Gen 1 Alpha 2 Leaking Oil

    1997 3.0 with the Gen1 Alpha 2 is leaking gear oil from the weep hole on top of the shift shaft. curious as to what is needed to repair issue.
See more
Back
Top