skip_evans
Member
"Hi Everyone,
I plan on f
"Hi Everyone,
I plan on filling a 5 gallon tank with anti- freeze. I'm then going to pressurize it with about 40 p.s.i.. It is an old Coca-Cola tank that was used to feed syrup to Soda Fountain machines. I'm going to connect the out- side of the tank to the Mufflers. I'm not sure about the correct terminology. I'm talking about the earmuffs that you hook a hose to. I'm then going to run the engine until the tank is empty. I'll use a bucket to catch any spillage.
Will this work? Is this all I need to do to Winterize?
By the way, I'm the new boater with the cracked block. I removed the Manifold, and the Starter. I cleaned the area with a Dremel tool. A Welder is coming over Saturday to take a look. The crack is very bad. I think that it is hopeless. I just want to patch it so that I can Winterize it.
I think that I'll be looking for a Longblock over the Winter.
Thanks for all of the input on my last post. I forgot who recommended cleaning the patched area with a Dremel. That is one awesome tool.
Thanks, Skip"
I plan on f
"Hi Everyone,
I plan on filling a 5 gallon tank with anti- freeze. I'm then going to pressurize it with about 40 p.s.i.. It is an old Coca-Cola tank that was used to feed syrup to Soda Fountain machines. I'm going to connect the out- side of the tank to the Mufflers. I'm not sure about the correct terminology. I'm talking about the earmuffs that you hook a hose to. I'm then going to run the engine until the tank is empty. I'll use a bucket to catch any spillage.
Will this work? Is this all I need to do to Winterize?
By the way, I'm the new boater with the cracked block. I removed the Manifold, and the Starter. I cleaned the area with a Dremel tool. A Welder is coming over Saturday to take a look. The crack is very bad. I think that it is hopeless. I just want to patch it so that I can Winterize it.
I think that I'll be looking for a Longblock over the Winter.
Thanks for all of the input on my last post. I forgot who recommended cleaning the patched area with a Dremel. That is one awesome tool.
Thanks, Skip"