Howdy everyone, was hoping to get some advice on checking reed condition on a 1988 Mercury XR-4 150 hp.
I've tried everything else that could contribute to the motor dying when getting out of the hole and this seems to be the last thing to look at.
I've build the carbs, fuel pressure is above 8 psi, timing is set, plugs are new, compression is within 5 psi across cylinders and running about 120 psi, tried a variety of jets.
About give up. Please Help. I don't have a borescope but what are my alternatives.
Thanks for any help.
I've tried everything else that could contribute to the motor dying when getting out of the hole and this seems to be the last thing to look at.
I've build the carbs, fuel pressure is above 8 psi, timing is set, plugs are new, compression is within 5 psi across cylinders and running about 120 psi, tried a variety of jets.
About give up. Please Help. I don't have a borescope but what are my alternatives.
Thanks for any help.