Logo

Water pump, where's the water?

RGP

Regular Contributor
1980 Johnson 35 hp model J35RLCSM. New impeller. Fresh water motor. No water at tell tale. Bucket testing. Deeply submerged. Removed L/U multiple times to check for water tube to pump connection. OK.Checked water tube for obstruction. OK.

Suggestions for what next greatly appreciated.
 
Engine was getting hot on exhaust cover. Could see stream of smoke from tell tale. Did try removing telltale hose. No difference.

Removed L/U again. Water tube connection is a real bear on this motor. Tube sways around when trying to line it up.

Also seeing connection on this motor is a real problem as it closes up.

Used a piece of soft wire to help line up connection. Guess I got it. It's pumping.

Verdict: No connection from pump body to water tube.

Thanks everyone.
 
Back
Top