MarineEngine.com does not offer troubleshooting assistance or repair advice by email or by telephone.
You are invited to join our public Boat Repair Forum to seek assistance from other members.
You may also visit the Boat Motor Manuals section of our site to obtain a service manual.
Yes i did i started from the stern and checked for loose clamps and made sure all bolts were tight i even tried using a mechanics stethoscope at each connection to hear for any noise or sounds that indicate it sucking air and checked to see if there is any water dripping but i did not find anything . i have replaced everything except the copper pipes and the pivot tube and seals all the gaskets , orings and gromets that fit over the end of the pipe were replaced
How can you tell if the circulation pump is working properly