Is there an easy way to tell if vibration is caused by mount failure or a timing issue.
On a separate issue may or may not be related....
the manual has the firing order as shown however the firing order on the boat is as shown in red
same sequence just different locations (out by one counter clockwise) on the distributor cap...
here's a link to the engine run;
https://youtu.be/-E5fI4-lPs4
I appreciate all feed back.
On a separate issue may or may not be related....
the manual has the firing order as shown however the firing order on the boat is as shown in red
same sequence just different locations (out by one counter clockwise) on the distributor cap...
here's a link to the engine run;
https://youtu.be/-E5fI4-lPs4
I appreciate all feed back.