Unknown part j200txecm

[Whmstang99]

I need help. Coming off fuel line it T’s and a small gas hose goes to what appears to be a sensor that goes into the motor held down by one small screw. The nipple broke off and is leaking gas, so I just need a new part but I search every site and cannot identify the part.
any suggestions

 

[racerone]

Vacuum switch.---Alarms when there is a restriction between pump and fuel tank----Simply found on the ----Fuel pump parts page.----A few click right here on this site !!

 

[Whmstang99]

Vacuum switch.---Alarms when there is a restriction between pump and fuel tank----Simply found on the ----Fuel pump parts page.----A few click right here on this site !!

Thanks it is the vacuum presurre switch. When I replaced the main fuel line the nipple on the vacumn switch snapped off

 

[joereeves]

Thanks it is the vacuum pressure switch. When I replaced the main fuel line the nipple on the vacuum switch snapped off

Use a little WD40 as a lubricant to slide the hose on.

 

[Whmstang99]

Use a little WD40 as a lubricant to slide the hose on.

Thanks good advise

 

[racerone]

Sticking hose into boiling water for a minute is what I have used.-------Makes the rubber soft and stretchy.