Hello I'm new to the forum been in the boat troubleshooting for 2 days. Now I'm at a stand still.
So I got a 1978 alpha 1 gen 1 single solenoid trim and tilt system the trim goes up perfectly no issues when I push the Down button it turns very slowly and comes to a halt after about 2 inches of lowering then does. Nothing
I cleaned all the connections on the relay still the same thing it seems like a dirty terminal to me but could it be in the hydraulic systems itself?? My next move I think I'm going to let the fluid out of the rams and see if it goes all the way down any suggestions would be helpful thanks..
So I got a 1978 alpha 1 gen 1 single solenoid trim and tilt system the trim goes up perfectly no issues when I push the Down button it turns very slowly and comes to a halt after about 2 inches of lowering then does. Nothing
I cleaned all the connections on the relay still the same thing it seems like a dirty terminal to me but could it be in the hydraulic systems itself?? My next move I think I'm going to let the fluid out of the rams and see if it goes all the way down any suggestions would be helpful thanks..