This is not engine related, but I thought someone out there may have a suggestion. This morning I removed my transom rod holders to install new rubbers and caps. When I removed them, the wood underneath the holders was saturated and mushy, which scared the crap out of me. I drilled several small holes in the wood from underneath the transom lip and it looks like the saturation spreads about 2 to 2.5 inches around the hole for the rod holder. Beyond that, it seems dry and strong. Apparently, the seal where the rod holder lip matches to the top of the transom leaked and has held water in that area for a long time. Does anyone know of any product I can inject into that area to expel the moisture and harden the wood? I would really like to avoid trying to rebuild the entire transom lip.