I have a 2007 crusader in a 2001 25 Carolina classic. I've had some work done recently, including having my senders replaced. I filled the boat up with fuel to run it (there has been about 1/3 tank most of the winter).
The boat runs fine at idle, and also after it gets in plane, but getting out of the hole was a struggle. Couldn't go over 4200 rpm's. No problem exceeding that after plane.
I don't know when the last time the racor fuel filter was changed, so I am starting there. I'll also look at the strainers leaving the tank for clogs. Anyone have any idea what else it could be? Hoping it's a fuel issue and not an engine issue.
The boat runs fine at idle, and also after it gets in plane, but getting out of the hole was a struggle. Couldn't go over 4200 rpm's. No problem exceeding that after plane.
I don't know when the last time the racor fuel filter was changed, so I am starting there. I'll also look at the strainers leaving the tank for clogs. Anyone have any idea what else it could be? Hoping it's a fuel issue and not an engine issue.