https://oemparts.partspak.com/oemparts/a/hma/50956e5cf87002378814f8bb/cylinder-block
When doing this, will I need to also replace the Sealing Bolt (#6 on diagram) as well as the Sealing Washer (#7) and the pan screws? Or are those all reusable - just swap out the anodes?
When doing this, will I need to also replace the Sealing Bolt (#6 on diagram) as well as the Sealing Washer (#7) and the pan screws? Or are those all reusable - just swap out the anodes?