the_tassie_devil
Regular Contributor
"Hi all,
I am trying to sep
"Hi all,
I am trying to separate the Stern Drive unit from the Bellhousing of the 225 Buick V6 in my 1972 Chris Craft Sportsman 16.
I have undone all 16 nuts and supported the weight of the Stern Drive but cannot lever the two apart.
Is there something inside the Bellhousing that has to be undone before the Stern Drive can be removed?
Or, do I have to remove the engine at the Bellhousing first. Then remove the Bellhousing from the Stern Drive?
Thanks in anticipation.
Bruce Reynolds,
Tasmania,
Australia"
I am trying to sep
"Hi all,
I am trying to separate the Stern Drive unit from the Bellhousing of the 225 Buick V6 in my 1972 Chris Craft Sportsman 16.
I have undone all 16 nuts and supported the weight of the Stern Drive but cannot lever the two apart.
Is there something inside the Bellhousing that has to be undone before the Stern Drive can be removed?
Or, do I have to remove the engine at the Bellhousing first. Then remove the Bellhousing from the Stern Drive?
Thanks in anticipation.
Bruce Reynolds,
Tasmania,
Australia"