1995 Evinrude 200 Vindicator E200STLEOA
Rebuilt the engine and now it wont idle or run right.
The carbs are blowing fuel out instead of sucking it in. Would installing the pistons with the exhaust side of pistons aligned with the intake side. Motor turns nice and free and has good compression but I cant figure out why the carbs are blowing gas outwards. I can feel the carbs sucking and then blowing on each stroke of the piston. Have checked the VRO pump out and the carbs have been rebuilt. Can pump up the bulb firm and no gas leaks anywhere. If anyone can possibly verify my problem I would greatly appreciate it.
Rebuilt the engine and now it wont idle or run right.
The carbs are blowing fuel out instead of sucking it in. Would installing the pistons with the exhaust side of pistons aligned with the intake side. Motor turns nice and free and has good compression but I cant figure out why the carbs are blowing gas outwards. I can feel the carbs sucking and then blowing on each stroke of the piston. Have checked the VRO pump out and the carbs have been rebuilt. Can pump up the bulb firm and no gas leaks anywhere. If anyone can possibly verify my problem I would greatly appreciate it.