MarineEngine.com does not offer troubleshooting assistance or repair advice by email or by telephone.
You are invited to join our public Boat Repair Forum to seek assistance from other members.
You may also visit the Boat Motor Manuals section of our site to obtain a service manual.
You are right indeed, I did it and put in the position selected adjusting with a 9/16. Thank you so much, best wishes and regards from Argentina!No
Question is :
[i]I h
No
Question is :
I have a 1979 model with no system to keep it in the tilted up position - is there a bracket/clip that I am missing or do I have to keep jamming a piece of 2x4 lumber in it?
Reply from jacksoldoutboards reads
I do not think there is such a thing. The transom pivot bolt(9/16" wrench required)is tightened to enhance the drag of the motor to the transom mount.. It should be adjusted where the motor will stay in the position selected but will drop with a light downward force. Adjusted properly - the motor will stay where you put it