Rick Baxter
New member
Ok here's what I got 91 Bayliner with with 3 liter Mercruiser. Was shifting fine until I did a bellows and gimbal bearing replacements get it all back in and the shift cable of hanging up and making the motor stall. All good took it in and the shop points out I've got an pre alpha drive and they want to throw a gen 2 on it for about 2k. Seeing as I've got 3 k in the boat kinda wanna stay away. So I know I can mod the shift linkages to make my pre alpha work I'm assuming here the linkages are for a gen 1 which is what the boat should have started with or maybe a gen 2 is the linkages were changed when the new motor was put in. So does anyone know for have the links to the mods to make the pre alpha work with the 1 & or 2s. I know it's possible because I ran the boat before I did the bellows and it worked just fine.