"Months ago I posted that I ha
"Months ago I posted that I had changed the water pump in the foot, the thermostat, and flushed all the lines after the motor ran hot. I took it to a shop and they found a piece of melted baffle (backflow baffle) still in the manifold area. With all that it runs fine on a hose at home and then on the lake at increased RPM it runs hot. I get past the no wake zone for the landing and apply power to about 2000RPM and the gauge begins to rise. Before I get back to the no wake zone it is at 250 and rising. What can be wrong? The lake water is colder than 250 ;-}"
"Months ago I posted that I had changed the water pump in the foot, the thermostat, and flushed all the lines after the motor ran hot. I took it to a shop and they found a piece of melted baffle (backflow baffle) still in the manifold area. With all that it runs fine on a hose at home and then on the lake at increased RPM it runs hot. I get past the no wake zone for the landing and apply power to about 2000RPM and the gauge begins to rise. Before I get back to the no wake zone it is at 250 and rising. What can be wrong? The lake water is colder than 250 ;-}"